so i have a TM K9b running the Mikuni pump. followed the steps online on how its supposed to be run, checked with other setups at track and all the same.
sinker line, comes out to fuel filter —> main pump inlet ----> out on the two ports coming to Y connector —-> going to T connector. One leads back to fuel tank other end going to carb.
My floats look crooked. One seems to be bent, thy move freely. I just ordered all new floats and few other parts for the carb. Will order new sinker line. Fuel pump is brand new, there are a few tight bends on the fuel line so i cut some longer new ones and putting a new fuel filter…
If it still doesnt work then ill set it on fire lol
I may try the longer fuel line running to the carb.
Also do the floats need to be sitting level when holding the carb upside down with float bowl off. Mine sit slightly tilted downwards. Others ive seen sit level.