Hey guys, wondering if this a problem seen by anyone in the states with OTK karts. I’ve come across a few here in Trinidad where the ackerman connection point is actually making contact with the tank and on quite a few others (mine included) its incredibly close but not touching. Is this something common on OTKs?
It’s common to the OTKs. But there’s an easy fix, bend (down) back the tabs for the floor tray. This will move the floor tray down, and give you back some clearance.
2 Likes
Yep, my 2016 401 did that with the 8L tank
1 Like
Thank you so much. I have the same problem. But not anymore
1 Like
Mayko products, We built tanks for many years. Some pictures of the problem would help.