Hi Everyone!
Is there anyone else running the R3 Lasers from Kelgate?
On the caster add on’s there is caster rear and caster forward.
So when reading my pills it is as below:
Max caster with neutral camber reads (Rear -20 ) and (Forward 25)
Min caster with neutral camber reads (Rear -15) and (Forward 20)
So it would seem as the caster is reduced as the numbers also reduce.
However.
If I add maximum Positive camber I get (Rear -10 ) Forward (30)
If I add maximum Negative camber I get (Rear -30) (Forward 0)
This is what confuses me on the caster readings, as I add max positive camber have I added or reduced caster from my max caster setting, same with max negative camber.
Can I just look at either rear or forward caster and as that number increases decreases, thats my measurement for more or less caster?