I’m pretty much same size, slightly lighter but close…anyways standard answer is bend left strut only, use seat offset to help. What I personally do, I cheat a little.
Say you have a new chassis so seat stays have to be widened 4 inches. In that case, I get 3 from the left, 1 from the right. If suggested offset is 5mm, I use 10mm and that tends to get me closer.
Chassis are not meant to have the right stay bent, but they are also not designed around a giant. So be careful and don’t overdo it. Also engine clearance could be an issue. My IPK was a breeze, I’m a little tight with clearance on the right side, but it works great for me