Spindle Camber Angle Options

[NikG (Nik Goodfellow)]

It allow you to alter the camber without altering the king pin inclination.

There’s some discussion here:

Spindle King Pin Angle

KPI is what The OP is asking about. It is the fixed angle the spindle and axle shaft is welded to. KPI cannot change as it is fixed (welded). If you have A set camber (or caster), KPI can not be changed when changing caster,camber unless you change the spindle assembly. A 10 deg will will change your weight jacking less as you turn your kart the A 12 deg spindle. It is for the most part built to suite your chassis. if it was built with 10 ,that’s what you use. there are different roads taken for…