Tm kz coolant leak

Hi guys,
I have a newish TM KZ R2 special that has a slow drip of coolant from the bottom of case area

Dismounted the engine, but I can’t locate the source of the leak.

All hoses were intact with no observable leaks…
The hose spigots that are tight and have sealant at their base…

Any ideas, or suggestions ,??!

Thanks ,
Bill

The most common place is definitely the spigots.

2 Likes

Hi,

I also had a mysterious leak that appeared to be coming out of the bottom of the case. After getting the motor off and investigating further it was actually the lower spigot where the U-bend hose goes from the cylinder to the case. It actually wiggled when I pushed on it. I took off the hose and unscrewed the spigot to inspect for cracking or other damage. There was none. The leaking was coming from it just being a little loose and the water pressure of the water pump was causing it to run down the case and drip. I put some high temp silicone on the threads and put it back in tight this time and no more leaking since.

2 Likes