The Mini-Toolbox - do I dare?

I normally take almost 300# of tools to the track, and often find myself lending them out.

I kept track of what tools I used to assemble my CRG KT2 / 2021 X30 from the parts kits, and was thinking I could improve my gas mileage and shorten my load-out if I only carried those.

Do you think I could get away with this?

Brass Mallet
Snap Ring Pliers
Safety Wire Pliers
Exhaust Spring Puller
Battery Electric Impact Wrench
Drill with 1/4" and 5/16" bits
3/8-3 Extension
10mm socket
13mm socket (lug nuts)
3/8F-1/2M wrench adapter
22mm socket (front hubs)
10mm mini combination wrench
13mm combination wrench
17mm combination wrench
14mm ratcheting wrench
10mm ratcheting flex wrench
13mm ratcheting flex wrench
3, 4, 5, 6, 8 mm Allen T-handles
5mm Allen L-wrench
Spark Plug wrench
Chain Breaker
Laser Alignment Systems - chain, front-end


That’s essentially what I bring with me. I can fit everything I need in the bed of my truck. Tool box, stand, air compressor, fuel jug, three sets of wheels, two totes with spares and cleaners, and my kart. Only thing that goes in the back seat is a compact 10x10 tent and the front bumper. I only have the stuff I use frequently in the small tool box. Then fit some of the lesser used stuff in the totes.


Need a tape measure, small phillips for mychron batt and flathead for airbox. Step bit would be good.


Obligatory Tylenol if you’re over 30 and/or 200lbs :smiley: