Sniper laser alignment problem

[KartingIsLife (James McMahon)]

Sweep can be a bit of a pain sometimes, there might be a nugget in there that can help in addition to what Matthew said:

Front alignment - is sweep important? Or is there an issue

I was doing a front alignment on my OTK to increase some negative camber and noticed that the total distance of each tie rod was off by a bit, ~32cm vs ~31.5cm… this lead me to check the sweep and its off as I would expect with the tie rod difference. Went straight back to the drawing board to reset everything… Did a runout test on the kingpins, tie-rods and they are true (visually steering rod is straight). Set the steering wheel straight by measuring bar stock level on setting column. Set to…

Front spindles and steering sweep

For the first time I notice something strange with my kart steering. Currently I have it on a vertical stand with no wheels (winter storage) and as I look at it, I noticed that when I turn the steering, lets say to the left or simulating a left turn, the steering will sweep to the left, the left and right spindles will move accordingly, but as I get to almost lock up, the right spindle (outside for a left turn) starts to drops/sweeps back to the right (opposite to the turn)? This is on a Margay…